Drum pump
manual pumps
Handpompen zijn altijd een nuttig en kosteneffectief alternatief voor conventionele elektrische of pneumatische vatpompen wanneer slechts kleine hoeveelheden medium uit jerrycans of vaten moeten worden verwijderd, of wanneer de klant de vatpomp slechts af en toe of zelden gebruikt.
Models
N-04
Pump material: Polypropylene
Shaft: Polypropylene
Seals: depending on the media
Flow rate: ca. 0,3 l/stroke
Hose connection: 3/4”
The telescopic suction tube is adjustable from 500 to 950 mm and has a diameter of max.
34 mm.
N-460
Material: pump housing made of cast iron
Seals: NBR
Flow rate: 0,25 l/rotation
Pump tube diameter: 53 mm
Suction tube length: 1000 mm;
Therefore, suitable for smaller containers and 200 litres drums
Pump complete with discharge arc and drum adapter G 2”.
N-08
Pump material: PVDF
Seals: PTFE
Flow rate: 0.3 l/rotation
Suction tube length: 3 x 35 cm
Pump complete with discharge arc and drum adapter G 2”.
Regular PTFE lubrication required.
N-16
Execution for fire brigade with flexible suction hose instead of a rigid tube.
Suction hose DN19 x 4; 1,5 m
Discharge hose DN19 x 4; 1,5 m
Flow rate: app. 0,25 l/stroke
In pump housing integrated drum adapters with M 64x4 and G 2” enable an easy fixing in drum.
APPLICATION: Fire brigade hand pump ATEX compliant, single-acting hand pump that can be used for following media of hazard classes A I-III: Diesel, heating oil, fuel, petroleum, anti-freezing liquid for cooler (undilated), thin fluid mineral oils and rapeseed methyl ester.